We are custom bending Stainless steel, 3/8 .035 wall tubing to be used for vacuum emission probes for the state.
These probes have 12 holes drilled in specific locations. They have custom handles being held on by a 2 part epoxy, and the one end has a stainless steel plug welded into the end. The other end is flared to a .470 diameter to accept a JIC fitting. The JIC fitting is then attached to a vacuum pump which draws the vehicle exhaust into the testing equipment for analysis.
So, in one piece you have, cutting, bending, drilling, flaring, welding, gluing, reaming, and attaching fittings.
.jpg) |
| Full Probe. Overall length is 54" |
 |
| Above and below pictures are of the flared end with the JIC fitting, and the handle |
.jpg)
 |
| This end has the holes and the Stainless plug welded into it |
