Dissolved Oxygen Monitor and Filter Skid

A New York power generating station needed to monitor the Dissolved Oxygen content of the boiler feedwater. They had two necessary collection points, however only wanted one dissolved oxygen monitor.
The customer also wanted both samples filtered before it entered the D O Monitor. This would produce more accurate readings as well as protect the device
.

Waltron Dissolved Oxygen Monitor

Dual Cartridge Filter System, Stainless Steel Tubing

Orchem Pumps designed and manufactured the skid to the customers specifications.
We used a Waltron Dissolved Oxygen Monitor.

Components mounted on "U" channel

Pre wired

The unit was pre-piped using 1/4", 316 Stainless Steel tubing, and connected with Parker compression fittings. Flow would be regulated from each collection point to the individual cartridge filters using Parker Stainless Steel needle valves. This would ensure precise flow to the Waltron Dissolved Oxygen sensor.

The complete package was delivered and installed on the discharge side of their sample coolers.

Compact design

The unit is compact and the customer wanted it floor mounted instead of wall mounted. Either option was available. The components were mounted on "U" channel so if other controllers needed to be added in the future it would be a simple addition.